应该可以分配或挂载之类的!!
以下是LINUX coS3.2的磁盘挂载 仅作参考!
通过fdisk -l我们可以看到/dev/xvdb(此名称因系统而异)容量有23.6G,
而且没有分区,接下来我们对它进行分区和挂载
fdisk -l
[root
@MyVPS ~]# fdisk -l Disk /dev/xvda: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/xvda1 * 1 13 104391 83 Linux /dev/xvda2 14 1044 8281507+ 8e Linux LVM Disk /dev/xvdb: 23.6 GB, 23622320128 bytes 255 heads, 63 sectors/track, 2871 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System 对/dev/xvdb(此名称因系统而异)进行分区:
fdisk /dev/xvdb
[root
@MyVPS ~]# fdisk /dev/xvdb The number of cylinders for this disk is set to 2871. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) 输入n新建分区 Command (m for help): n Command action e extended p primary partition (1-4) p /dev/xvdb中第1个分区 Partition number (1-4): 1 First cylinder (1-2871, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-2871, default 2871): Using default value 2871 输入W保存退出 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks.
将新分区xvdb1(此名称因系统而异)格式化为ext3格式 mkfs -t ext3 /dev/xvdb1
[root
@MyVPS ~]# mkfs -t ext3 /dev/xvdb1 mke2fs 1.39 (29-May-2006) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 2883584 inodes, 5765319 blocks 288265 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=4294967296 176 block groups 32768 blocks per group, 32768 fragments per group 16384 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 24 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.
我们示范将新分区xvdb1挂载到目录/home
因为home已经存在,所以我们挂载
mount /dev/xvdb1 /home
如果你需要挂载在别的目录.可以新建一个目录挂载.如:home1,使用如下命令:
mkdir /home1 mount /dev/xvdb1 /home1
完成后我们通过df -hal可以看到,新分区已经挂载到目录/home上了
[root
@MyVPS ~]# df -hal Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 5.7G 1.4G 4.1G 25% / proc 0 0 0 - /proc sysfs 0 0 0 - /sys devpts 0 0 0 - /dev/pts /dev/xvda1 99M 28M 67M 30% /boot tmpfs 256M 0 256M 0% /dev/shm none 0 0 0 - /proc/sys/fs/binfmt_misc sunrpc 0 0 0 - /var/lib/nfs/rpc_pipefs /dev/xvdb1 22G 173M 21G 1% /home
最后添加开机自动挂载: echo "/dev/xvdb1 /home ext3 defaults 1 2" >> /etc/fstab
这样就完成了!
通过后台控制系统重做系统之后,只需要重新挂载一次即可
mount /dev/xvdb1 /home
最后,重新添加自动挂载即可:
echo "/dev/xvdb1 /home ext3 defaults 1 2" >> /etc/fstab 图片教程:
如果你没有明白上述挂载的区别性 请参考:
启用未使用的硬盘教程:
http://forum.xensystem.com/thread-50-1-1.html重装系统不丢失数据挂载教程:
http://forum.xensystem.com/thread-53-1-1.html